Lake Placid Club Grandvew

101 Olympic Drive, Lake Placid, NY 12946

Passed · Oct 19, 2026 Directions
81
Good BiteKarma score 81 out of 100
How the BiteKarma score works

Each routine inspection starts at 100 and loses 7 points for every critical violation and 2 for every other one, half again as much when the same problem was cited at one of the two inspections before. A failed inspection counts as 69 at most. The score averages the five newest routine inspections, with the most recent counting most, and stays below 70 for 90 days after a fail unless the restaurant passes again. 90 and up is excellent, 80s good, 70s fair, and below 70 poor.

At a glance

  • Passed 6 of 6 graded inspections since 2024.
  • Last inspected Oct 19, 2026: passed with 6 violations, 1 critical.
  • Keeps coming up: Food from unapproved source, spoiled, adulterated on premises., cited 2 times, plus 5 other repeat issues.
  • 4 critical violations in the last two years.

Inspection history 6 visits

  1. 2026
  2. Passed Oct 19

    Inspection

    6 violations, 1 critical
    • Critical Food from unapproved source, spoiled, adulterated on premises.
    • Minor Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Minor Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
    • Minor Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Minor Non food contact surfaces of equipment not clean
    • Minor Wiping cloths dirty, not stored properly in sanitizing solutions
  3. Passed Jan 27

    Inspection

    6 violations, 1 critical
    • Critical Potentially hazardous foods are not kept at or above 140°F during hot holding.
    • Minor Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Minor Non food contact surfaces of equipment not clean
    • Minor Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
    • Minor Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Minor Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
  4. 2025
  5. Passed Oct 2

    Inspection

    5 violations, 1 critical
    • Critical Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45°F as required.
    • Minor Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Minor Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
    • Minor Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Minor Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
  6. Passed Jan 6

    Inspection

    6 violations, 1 critical
    • Critical All poultry, poultry stuffings, stuffed meats and stuffings containing meat are not heated to 165°F or above.
    • Minor Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Minor Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
    • Minor Improper use and storage of clean, sanitized equipment and utensils
    • Minor In use food dispensing utensils improperly stored
    • Minor Non food contact surfaces of equipment not clean