Cheesesteak Boss

1250 Front Street, Binghamton, NY 13905

Passed · Jan 29, 2026 Directions
94
Excellent BiteKarma score 94 out of 100
How the BiteKarma score works

Each routine inspection starts at 100 and loses 7 points for every critical violation and 2 for every other one, half again as much when the same problem was cited at one of the two inspections before. A failed inspection counts as 69 at most. The score averages the five newest routine inspections, with the most recent counting most, and stays below 70 for 90 days after a fail unless the restaurant passes again. 90 and up is excellent, 80s good, 70s fair, and below 70 poor.

At a glance

  • Passed 3 of 3 graded inspections since 2024.
  • Last inspected Jan 29, 2026: passed with 1 violation.
  • No critical violations in the last two years.
  • Keeps coming up: Non food contact surfaces of equipment not clean, cited 2 times, plus 1 other repeat issue.

Inspection history 3 visits

  1. 2026
  2. Passed Jan 29

    Inspection

    1 violation
    • Minor Non food contact surfaces of equipment not clean
  3. 2025
  4. Passed Feb 5

    Inspection

    4 violations
    • Minor Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
    • Minor Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Minor Adequate, leakproof, non-absorbent, vermin-proof, covered containers not provided where needed
    • Minor Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
  5. 2024
  6. Passed Jan 23

    Inspection

    4 violations, 1 critical
    • Critical Potentially hazardous foods are not kept at or above 140°F during hot holding.
    • Minor Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
    • Minor Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
    • Minor Non food contact surfaces of equipment not clean